How to store anti-rust grease on the way to the customer

Straddle Stackers on the way to the customer often tend to be coated with some rust in the vehicle grease, which is to ensure that the vehicle looks very new. However, the anti-rust grease in the process of sending will inevitably be damaged, then how do we properly store rust-proof grease? Here we understand the next.
The appearance of ultraviolet and high temperature will accelerate the mechanical surface of the anti-rust grease oxidation deterioration phenomenon. Once the rain was soaked, it is prone to these problems, the surface of the phenomenon of corrosion. In order to prevent the production of grease, try to avoid the mechanical surface directly by the sun or ultraviolet radiation and rain water, should be stored in a dark place, avoid water, so that you can extend the use of vehicles, improve anti-rust ability.
Of course, in the storage of rust-proof grease should be the case. In the choice of storage location also has some requirements, not where can store the vehicle and rust-proof grease. Corrosion of metal parts will be a serious threat. To a reasonable layout, and the surrounding volatile volatile places to maintain a certain distance, or even excellent performance of rust-proof grease also failed to achieve these effects.
Metal parts oil seal, after a certain period of time, to regularly sampling rust-proof situation, such as oil film loss, loss, emulsification, discoloration or metal slightly lost light, dark, should be promptly cleaned, replace the performance similar to rust, So as not to affect the rust effect.

Stacked car anti - corrosion method

As a kind of machinery, the use of the process will inevitably occur in the process of corrosion problems, in the face of such problems when we how to solve it?
Stacking cars are usually used in the material is very good, but in the daily if you do not pay attention to electric electric walkie pallet jack car anti-corrosion, then the same will be seriously damaged to the performance of high heap, the following is a brief introduction to the next stacker Anti-corrosion method.
1, appearance: to minimize the electric forklift Jack in the dust and water vapor work, water vapor and dust will be deposited on the surface, prolonged contact will be easy to produce rust.
2, parts clearance: its main consideration is the gap produced by the corrosion, electrochemical corrosion, for the maintenance of mechanical precision parts is the need to pay attention to electrochemical corrosion.
3, parts large: for the general parts are to be anti-corrosion treatment, but the daily need to pay attention to the surface of the oil surface.
The above is in the process of maintenance of the forklift need to pay attention to several aspects, therefore, in the daily use of high heap, we need to understand these basic maintenance knowledge, the only way to make the use of vehicles become more efficient, While the service life will become longer.

Some of the precautions for using the stacker

We use the Electric and Manual Straddle Stacker when the car should pay attention to some of the issues, the following we specifically understand the next.
1, before the operation of high-load operations should be carried out inspection (such as operating checklist), there are any problems or damage should immediately state the competent disposal.
2, the powered pallet truck should be clearly marked load constraints, and provides no transfer or pile of materials beyond its additional load, and shall not add their own weight.
3, the goods should be placed and fixed, bulk goods need to use the appropriate containers, shelves installed, and pallets, pallets can not be damaged.
4, when the slope of the road, should pay special attention to operation, uphill or downhill, the transfer of goods should adhere to the uphill side to prevent the goods fall.
5, from the heap high car operating position, should first put down the fork, closed power and brake.
6, stacking high-speed mobile operation should be forked down to the appropriate height.
In short, some of the use of high heap note is the use of these, and hope to help everyone.

Tell the truth about the quality of the stacker product quality

Automatic stacking machine is mainly used for collecting aluminum foil containers. It is an automatic counter, Hand Pallet Trucks with scale,
We design and develop aluminum foil container production line with a new machine. Very stable, corrosion-resistant, because it uses high-quality aluminum alloy. PCL control panel, size and size can be based on the size of the container. Aluminum foil containers and automatic collection stacking.
You can use the JB-1050S automatic stacker, automatic screen printing machine, UV machine or UV / infrared drying together to collect paper, so that the paper automatically in order to improve production efficiency and product quality.
1. Controlled by the PLC, automatically collect the paper in order to make the paper.
2. Suitable for a variety of paper size, adjust the equipment behind, left and right can be easily and easily operate
3. Optoelectronic equipment inspection and control circuit board, stacking machine pneumatic mechanism in order to make paper.
4. The induction device controls the paper holding board to drop and make sure the receipt is automatically sing.
5. Feeding system control frequency conversion, stepless speed turning.

Where is the stacker porter?

The roadway electric stacker is evolved by forklifts and bridge stackers. Because the bridge is cumbersome and therefore the running speed is greatly limited, it only applies to the storage and storage frequency is not high or the storage of long raw materials and heavy goods warehouse.
Stackers are generally available in large, three-dimensional warehouses, large units, dairy, pharmaceutical, and tobacco warehouses.
The full range of mechanical automatic stacking machines eliminates the need for manual handling of the product, which translates into less material with less markings and better surface quality, which means more available products and less waste.
It also means significant savings in labor and higher throughput. The manual lift stacker is inserted into the system automatically to remove the gasket, and then the heap is transferred to the age rack until the rack is full of contours.

The use of modern stacker awareness

Know the Electric hydraulic stacker, what is the stacking crane stacking crane? I believe that the big business is no stranger, here we come to introduce the stacking machine!
Stacker refers to the use of fork as a take-up device, in the warehouse or workshop stacking items into the crane, often referred to as stacking cranes. The stacking machine is the main lifting and transportation equipment in the three-dimensional warehouse, and it is a special lifting equipment developed with the three-dimensional warehouse. Such equipment for the general warehouse are relatively high, up to 40m or more, mostly in the 10 ~ 25m. The main purpose of the Electric Riding Pallet Jack is in the three-dimensional warehouse between the roadway repeated shuttle operation, will be located in the entrance of the goods into the goods, or the goods in the goods removed to the roadway. But this equipment can only be used in the three-dimensional warehouse, and must be equipped with other equipment to carry goods out of the warehouse.