Walk -in vehicle classification and selection : Walking a wide range of vehicle types , the operating speed of vehicles on the walk- handling is usually limited to 5km / h or less. Unidirectional transport distance in less than 100m. If you carry long distance, frequent operation , the operating personnel fatigue and reduced efficiency . In high storage density and low stacking height , the walk -in vehicles can play better job performance.
Walk truck with plastic work positioners tray stacking height is generally used to control the turnover 5m or less. To ensure safety, security should be installed in the aircraft operating area . Load hoist truck walking speeds between 0.1 ~ 0.2m / s, the speed and the battery voltage to enhance the size of the form lifting frame , load weight and the size of the pump . Unit load height, width , length and weight must be consistent with standard shipping . Transportation standards including pallet size, transport distance and stacking height. Also, consider the slope of counter balance stackers the slope, the floor load conditions , lift limit , operating and environmental conditions affect the clearance of the unit load.
Pallet handling equipment with operating control: Walk -in vehicle operating efficiency directly affected control mode . Control issues including speed, etc. upgrade , brake and reverse control . Controlled by the horizontal movement of the handle end portion to enhance the speed and direction to achieve control . There are two steps forward speed control general type, third gear type and backward control . The lift and down by hydraulic control or manual electronic switch lever to achieve. Brake control is automatic braking when the steering handle in the vertical and horizontal position. When the handle is operable at any other position when the vehicle ahead. In order to improve operational safety and efficiency of handling equipment , forklifts also handle back function .
没有评论:
发表评论