pallet jack battery indispensable member

Electric forklift battery indispensable member, its main role is in the truck engine startup, the larger the current supplied to the starter; at the generator is stopped, the generator speed and generator low overload conditions, each electrical equipment supply. Air lift table batteries to the proper use and strengthen conservation, especially across the fault should be timely maintenance, exclude, to avoid early damage and improve their life.
1, add water: regular (general requirements for every five days in summer, winter, every 10 days) to check the electrolyte level, the level prescribed by the addition of distilled water, do not add water to prolong the interval and add distilled water too much, otherwise the electrolysis fluid will overflow, causing leakage.
2 Charge: battery charging process will produce gas charge should be kept ventilated place, no fire around and charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging charging plug will disconnect the arc, after charging machine off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover high precision bearing on the battery charge. Discharge level checked regularly, every month or two (or, as the case may be) removed from the vehicle and a supplementary charge, strict implementation of the electrolyte density adjustment when changing seasons, changing areas.
3, terminal, wire, cover repairs must be performed by a qualified technician: Note the battery is securely installed between the battery and the frame should have anti-vibration pads on the forklift. Wire connections are tight to ensure good contact. When the battery is connected, you should take the line of fire, followed by grounding line; stitches removed, the order is reversed.
4 Clean: if dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally. Regularly to remove dust dirt on the battery, remove the oxide electrode connected to the head of the pile and wipe away the electrolyte battery cover, add liquid to keep the vent plug hole open.

Every 15 days or so Forklift Maintenance work should be carried out as follows. Check the battery level in each cell, the electro-hydraulic plates should be more than 10 ~ 15mm, such as lack of distilled water should be added. With a hydrometer to measure the density of each single cell within the cell electro-hydraulic. Check the degree of discharge, the discharge as more than 25% in winter, summer, and discharge more than 50% should be added to charge the vehicle off. Check the battery housing for cracks and electrical fluid leakage.