2015年7月22日星期三

Note the use of the truck charger

(1) Forklift charging confidential exquisite disassemble and decomposition;
(2) The ride on pallet trucks is forbidden to disassemble the charger;
(3) hand pallet trucks charger should be placed upright, carried out in dry and ventilated environment, avoid moisture, away from flammable products;
(4) Under the conditions of the battery is full, first disconnect the input AC power, disconnect the connection between the charger and the battery;
(5) in the absence or long-term without the condition, you must disconnect the AC power;
(6) Do not cover the charging process the charging machine, the ambient temperature of not more than 40 ℃;
(7) Forklift charger for indoor use only, to guard against rain;
(8) the prohibition to non-rechargeable battery;
(9) is not less than twice the time interval of 10 seconds boot;
(10) The charger should be kept clean to prevent dust and moisture intrusion. When the long-term need, should be placed in dry and ventilated indoor; place and covered with a hood. After a period of time, should add power to tide;
(11) during charging, ventilation louvers on the cabinet can not be masked to ensure that the heat generated inside the charger spread in time. Fuse the input and output circuits after the blows, according to the required specifications necessary to replace. Fuses can not be too thick, never allow replaced with a wire. When the AC input voltage is 110 volts, the input current of 10.8 Ann. When the AC input voltage is 220 volts, the input current is 5.4 security. When the two work simultaneously rectifier output current up to 12 A, working alone when a rectifier, the output current does not exceed 6 A. It should use the appropriate fuse according to the input and output current.

没有评论:

发表评论