liftstar electric stacker Operation

1, with the vehicle should be checked before pumping the brakes and working conditions and to ensure that the battery is fully charged. Hands holding the joystick, forced to work with the vehicle slowly goods, if you want to stop, use the parking brake or foot brake, the vehicle parking
2, unloading
(1) In the case of the lower fork vertical careful to keep the shelves near the bottom shelf and then insert the pallet ah
(2) fallback platform stacker let move the pallet fork
(3) raise the forks reach a height requirement, and slowly moves to the discharge tray at the same time to ensure easy access to the pallet fork and goods in the fork of the safety position
(4) until fork lift pallet is lifted from the shelves
(5) slowly back in the channel
(6) slowly lowering the cargo while ensuring that the fork does not touch the lower course of obstacles
Note: rise during cargo, steering and braking operations must be slow and careful.
3, stacking
(1) Maintain close careful goods low shelf
(2) enhance the shelf above the cargo plane
(3) slowly moving forward, when the goods are stopped at the top of the shelf, put down pallets at this point and not to pay attention to the forks under the urging of goods on the shelves, ensure that the goods are in a safe location
(4) slowly rolled back and ensure a firm position itself pallets
(5) Lower the forks to the Walkie stacker lift truck can travel position

liftstar electric stacker operation points

liftstar electric stacker safe handling precautions are many, following the major users Connaught forklift to mention some useful suggestions are as follows:
1, electric forklift truck operators are not allowed to drink and drive, overweight, high, speeding, prohibit braking, sharp turns. Prohibition Stacker enter premises storing solvents and flammable gases
2, the electric car pile high safety devices must be complete and intact, the components sensitive and effective, good technical performance, non-Stacker sick with.
3, maintaining platform stacker standard traveling state, forks off the ground with the forks 10-20 cm from the ground, Counter-balance Stacker reduced to about ground with poor road conditions in the job is stopped, the weight appropriate to reduce, and Stacker should reduce speed.
4, electric forklift trucks driving, such as electrical controls out of control, then promptly disconnect the power supply.
5, electric forklift trucks use in particular should pay attention to timely and proper maintenance of battery charging and battery. Note that when the battery charging methods, both to make the battery fully charged, they can not cause the battery from overcharging.
6, the liftstar electric stacker operation, minimize the use of long distances acceleration, when the Stacker start, faster, hold the accelerator pedal, such as better road conditions, Stacker will continue to accelerate. When Stacker need slow down, relax the accelerator pedal, gently depress the brake pedal, which can take advantage of the deceleration of energy, and if cars piled high with regenerative braking function, you can make the kinetic energy is recovered during deceleration. When the vehicle ramp down, do not disconnect the Stacker drive motor circuit gently depress the brake pedal, so that forklift trucks operating in regenerative braking, the kinetic energy of the downstream use of the vehicle, reducing the battery energy consumption.
7, electric forklift trucks running, do not put "forward, backward" direction switch mistaken turn switch. Unless you need rapid deceleration, do not direct the brake pedal in the end. Vehicle application process, we found the battery is low (by the charge gauge, power loss indicator and other alarm devices available), charge the battery as soon as possible, to prevent excessive battery discharge.
8, electric forklift trucks running, never at high speed process, often taking emergency brake; otherwise it will brake assembly, driving enormous friction, shorten the braking assembly, driving the life, or even damage brake assembly, driving.

liftstar liftstar electric stacker according to the operating environment of choosing an electric

If you need to move the cargo business warehouse environment or environmental noise is required, when selecting models and configuration be considered. If it is in cold storage or in explosion-proof requirements of the environment, platform stackerconfiguration should be cold or explosion-proof type. Stacker process carefully examine job, you need to go through the place, imagine the possible problems, such as when a storage door height of Stacker is influential; and out of the elevator, the height and the impact of High Lifting stacker bearer; when upstairs job, whether the floor bearing the corresponding requirements, and finally considering all the factors determining the final liftstar electric stacker models and technical specifications.

Select liftstar electric stacker according to job function

liftstar electric stacker basic job functions are divided into levels of handling, stacking / pick up, loading / unloading, sorting. It can be determined from the company's initial product line based on business operations functions to be achieved. In addition, special operations capabilities will affect the platform stackerspecific configuration, such as handling the rolls, hot metal, etc., need Straddle stackers installed attachments to complete special features.

liftstar electric stackerOutline

Semi-electric stacker, electric forklift trucks, all-electric forklift trucks, electric motor driven, battery is an industrial handling vehicle energy refers to a member for loading and unloading pallets, forklift, stacking and short distance wheeled transport vehicle transport operations. International Organization for Standardization ISO / TC110 called industrial vehicles.Manual stackerinclude: walkie reach stacker, semi-liftstar electric stackerOutline, reach stackers, reach full electric stacker trucks, reach liftstar electric stackerOutline, pedestrian counterbalanced forklift trucks.

liftstar electric stacker

liftstar electric stacker is a battery electric power as an energy source, the electrical storage device as a power source. The main structures include: batteries, motors, hydraulic pumps, cylinders, piston rod, fork, chain, controller, etc. devices. Its main function is to enhance the weight to the desired height. Usually used in warehouses, workshops and other material handling needs a place, with the tray use, can greatly improve storage efficiency. So electric forklift trucks has been called electric pallet liftstar electric platform stacker. Electric forklift trucks has been divided into two categories: all-electric forklift trucks and semi-liftstar electric stacker.