liftstar electric stacker operation points

liftstar electric stacker safe handling precautions are many, following the major users Connaught forklift to mention some useful suggestions are as follows:
1, electric forklift truck operators are not allowed to drink and drive, overweight, high, speeding, prohibit braking, sharp turns. Prohibition Stacker enter premises storing solvents and flammable gases
2, the electric car pile high safety devices must be complete and intact, the components sensitive and effective, good technical performance, non-Stacker sick with.
3, maintaining platform stacker standard traveling state, forks off the ground with the forks 10-20 cm from the ground, Counter-balance Stacker reduced to about ground with poor road conditions in the job is stopped, the weight appropriate to reduce, and Stacker should reduce speed.
4, electric forklift trucks driving, such as electrical controls out of control, then promptly disconnect the power supply.
5, electric forklift trucks use in particular should pay attention to timely and proper maintenance of battery charging and battery. Note that when the battery charging methods, both to make the battery fully charged, they can not cause the battery from overcharging.
6, the liftstar electric stacker operation, minimize the use of long distances acceleration, when the Stacker start, faster, hold the accelerator pedal, such as better road conditions, Stacker will continue to accelerate. When Stacker need slow down, relax the accelerator pedal, gently depress the brake pedal, which can take advantage of the deceleration of energy, and if cars piled high with regenerative braking function, you can make the kinetic energy is recovered during deceleration. When the vehicle ramp down, do not disconnect the Stacker drive motor circuit gently depress the brake pedal, so that forklift trucks operating in regenerative braking, the kinetic energy of the downstream use of the vehicle, reducing the battery energy consumption.
7, electric forklift trucks running, do not put "forward, backward" direction switch mistaken turn switch. Unless you need rapid deceleration, do not direct the brake pedal in the end. Vehicle application process, we found the battery is low (by the charge gauge, power loss indicator and other alarm devices available), charge the battery as soon as possible, to prevent excessive battery discharge.
8, electric forklift trucks running, never at high speed process, often taking emergency brake; otherwise it will brake assembly, driving enormous friction, shorten the braking assembly, driving the life, or even damage brake assembly, driving.