liftstar electric stacker for a wide array of options

liftstar electric stacker combines productivity, user-friendly controls and safety for the operator.It offers a wide array of options for almost any application.

Ergonomic and engineering advantages make electric platform stacker easy to operate: All control buttons concentrate on the multi-functional tiller head.The central placement of the tiller arm,in accordance with ergonomic engineering,ensuring less steering efforts.

electric pallet jack Stacker

1, Stacker wheels or drive motor speed significantly reduces severe overload cause: The battery voltage is too low or too big pile head contact resistance; between the motor electric platform stacker‍ commutator segments coke cause a short circuit between the pieces; motor brake motors with improperly adjusted leaving braking operation; drive head gearbox and bearing pedestal lack of lubrication or jamming; motor armature is shorted. Solution: Check the battery terminal voltage Stacker trailer coupling load or clean; clean up the commutator; adjust the brake clearance; check the cleaning and re-filling oil, remove jamming phenomenon; replacement motor.

2, Stacker crane lifting weak or can not reason: Gear pumps and pump mention excessive wear; improper high-pressure relief valve inside; oil pipeline spill; excessive oil temperature; mast carriage the existence of jamming; pump motor speed is too low. Solution: Replace worn or gear pump; readjust; check and repair; replacement of unqualified hydraulic oil and check the oil temperature of reasons; check and adjust; check the motor and troubleshooting.

3, electric stacker door frame Autotilt difficulties or action is not smooth reasons: tilt cylinder wall and seal excessive wear; valve spring failure within the stem; piston rod stuck in the cylinder wall or bending; tilt cylinders inside fouling too pressed too much or seals. Solution: Replace the O-rings or cylinder; replace qualified spring; replace damaged parts; cleaning adjustments.

4, less than the pump pressure or too slow. Cause: The Electric Hand Pallet Jacks‍ pump cover slot ring damage, excessive internal leakage; gear wear; pump motor speed is reduced; there is blockage in the pipe. Solution: Replace; replace oil pump; check commutator, remove inter-chip coke, carbon brushes position adjustment; check the cleaning.

5, electrical operation is not unusual reason: electrical box Micro Switch damaged or improperly position adjustment; the main electrical control circuit fuse or fuse; low battery voltage; contactor singeing, or dirt poor contact caused by too much ; contact no action. Solution: Replace the micro switch, re-adjust the position; replace the fuse of the same type; recharged; repair contacts, adjust or replace the contactor; check whether High Lifting stacker‍ the contactor coil circuit breaker or replace the contactor.

scissor lift platform has the following characteristics and uses

In recent years, the popularity of the lifting platform scissor lift platform makes more use to the civilian sector , scissor lift platform has the following characteristics and uses:
I. Introduction scissor lift platform : Scissor hydraulic lifting platform is widely used aerial equipment. Its scissor mechanical structure , after lifting the lifting platform has electric platform stacker high stability , large platform and high carrying capacity, so that larger altitude range of operations , and for many people simultaneously . It makes high-altitude higher efficiency, more secure. Is widely used aerial lift equipment.
Second, characteristics: scissor lift platform lift mechanism using high-strength manganese steel tube Shop Lifter production. With a safety device to prevent overloading of the lifting platform . Provided to prevent hydraulic line rupture safety protection valve . Have emergency lowering device in case of a power outage . The product is applicable to all industries altitude equipment installation, maintenance and other aerial mobility . Choose according to the different requirements of different forms of power ( eg : three-phase AC power , single-phase AC power , DC power and internal combustion power, etc. ) , plus coupled with manual hydraulic device, can power or no power elevating work place as usual , and add telescopic platform, the platform is insufficient length can be extended to the desired location, thereby improving efficiency. Is a modern tall buildings , ideal for equipment with products, is essential for the production of high-altitude safe and civilized .

Forklift to buy issues that need attention

Select the appropriate type and brand forklifts, the company in favor of the use of funds reasonably efficient. Currently manual stacker a forklift competitive with many manufacturers and brands, most brands are made of all imported or domestic production of some parts of the way, the performance is relatively stable, products have  different features, users can compare their following , resulting in a reasonable  and economical selection.
1, pre-sales technical services in place, due to the attachment on the part of the truck plant is not fully understood, which requires manufacturers are able to provide with the  necessary  technical support.
2, long life and low failure rate, safety, and require low noise, low vibration.
3, operation and electric platform stacker comparison is a lost set distance. Requirements convenient operation, reasonable design and Omission from small.
4, good mobility. Specific requirements are small size, light weight, compact, high quality of the rated load of the same specification attachments.
5, the economic comparison. Once the purchase cost and the cost of replacement parts, the warranty period long.