electric stacker Is a very important one hand hoist accessories

Is a professional chain hoists, lever hoists, cranes and other lifting equipment line tackle manufacturers, the following are details of inspection and maintenance of related news brief 5:00 hook.
Hook is generally used to link scissor pallet truck chain hoists and heavy loads. Is a very important one hand hoist accessories, maintenance or inspection if not in place may cause a series of accidents or damage to the chain hoist. Therefore it is essential to maintain and testing, mainly from the following five points of view:
1, whether the visual hook chain drum truck significant openings.
2, chain hoists are significant signs of wear, if any, should be replaced according to the degree of wear.
3, hook deformation, damage and corrosion.
4, the card must be able to effectively secure the hook in the mouth of the hook off and flexible action, no deformation. Instead, you need to replace the hook safety card.
5, hand rotary hook, under normal circumstances, there is no obvious gap at the bottom and head and about equalization, and can easily be rotated 360 degrees

electric stacker Residential entrance room floor should be higher than the outdoor terrace of not less than 0.1m.

the construction site should have a variety of lifting equipment lifting platform technical notes , played certificate, safety rules , operating biographical books.
2 , lifting machinery installation after installation and acceptance by the relevant departments to participate in the installation of the unit , and to the use of units ( personnel) in order to use the safety technical tests . Should be approved subject to mechanical electric pallet trucks power sector Where mechanical team to innovate .
3 , lifting equipment should have a variety of security, two insurers , four full limit must be sensitive and reliable not to overload the signal commanding officers must be trained certification examination , allowed undocumented command posts .
4 , we must establish someone hydraulic stacker  plane, is relatively fixed, and to develop a post responsibility system or commander responsible for the system , shift system, regular maintenance system .
5, the machine operator to conduct specialized training , assessment certificate issued to the safe operation of the lift platform after passing a separate operation before induction .
6 , various types of machinery must strictly abide by the rules , Do not drink and operate, earnestly implement the three no's : that allowed maintenance during operation , the device sick are not allowed to run , are not allowed to overload . Should be strictly checked before work is solid and reliable protection devices and machinery is functioning well, the operation can be carried out after passing the examination .

The event featured a five forklift products, including forklift trucks

October 15, 2013, the 114th Canton Fair opened as scheduled in the fall of China Import and Export Fair Complex, classic truck carrying five fifth appearance. Adhere to "start with the world" concept of development, creation date, appeared several times on a large truck show at home and abroad, deepening the pace of internationalization. The Autumn Fair forklifts carry quality products sparkling debut, confident, prepared, certainly a rewarding experience at this international trade event.

The event featured a five forklift products, including forklift trucks, especially the second generation by the attention. According to the needs of overseas customers for product hydraulic hand truck appearance and configuration, FD30 second-generation products based on the generation of products on the feasibility of a lot of improvement, and has successfully passed the market test. The product not only be able to meet the functional requirements, and environmental protection, humane, reliability and maintainability, and many other innovations, early in the design a lot of market research on the body structure, floor and dashboard powered pallet truck structure, Mast tilt cylinder structure, control and balance the weight of the structure have been humane improvement in the body to improve heat dissipation, operating horizons expand and enhance the effective sealing body, the concept of "people-oriented" design ideas, and generation of vehicles with than overseas customers get more pro-gaze. Other models on display four products are covered by a forklift, battery forklift, electric forklift trucks, electric pallet trucks four categories, providing customers with a full range from logistics to warehousing solutions.

Ordinary domestic Scissor Pallet Truck technical performance is generally low

Explosion-proof electrical machine on the truck insulation, electrical conductivity, temperature, short circuit, the current technical standards requirements, such as motors, electrical semi electric stacker components are caused by the body temperature in the explosion, poor heat dissipation

High, if the circuit design is also likely to cause a short circuit unreasonable, if the whole of the load current, will produce over current, temperature rise, easy to aging wires, insulation and other issues declined, resulting in electric

Explosion-proof forklift poor performance, even with protective means to stop running, will cause the machine to run a short time, to maintain a long time, life is short defects.

Ordinary domestic electric Rider Pallet Truck technical performance is generally low, if carried out on the basis of proof design, can certainly not a good proof machine performance, and explosion-proof modification machine technology

Performance will be reduced, so the design must first refer to the new technology to improve electric forklift technology level, but also innovative design ideas to design more in line with explosion-proof characteristics of the system, so that low-current, low temperature rise, low noise, high efficiency, high levels of intelligent control machine.

pallet jack battery indispensable member

Electric forklift battery indispensable member, its main role is in the truck engine startup, the larger the current supplied to the starter; at the generator is stopped, the generator speed and generator low overload conditions, each electrical equipment supply. Air lift table batteries to the proper use and strengthen conservation, especially across the fault should be timely maintenance, exclude, to avoid early damage and improve their life.
1, add water: regular (general requirements for every five days in summer, winter, every 10 days) to check the electrolyte level, the level prescribed by the addition of distilled water, do not add water to prolong the interval and add distilled water too much, otherwise the electrolysis fluid will overflow, causing leakage.
2 Charge: battery charging process will produce gas charge should be kept ventilated place, no fire around and charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging charging plug will disconnect the arc, after charging machine off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover high precision bearing on the battery charge. Discharge level checked regularly, every month or two (or, as the case may be) removed from the vehicle and a supplementary charge, strict implementation of the electrolyte density adjustment when changing seasons, changing areas.
3, terminal, wire, cover repairs must be performed by a qualified technician: Note the battery is securely installed between the battery and the frame should have anti-vibration pads on the forklift. Wire connections are tight to ensure good contact. When the battery is connected, you should take the line of fire, followed by grounding line; stitches removed, the order is reversed.
4 Clean: if dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally. Regularly to remove dust dirt on the battery, remove the oxide electrode connected to the head of the pile and wipe away the electrolyte battery cover, add liquid to keep the vent plug hole open.

Every 15 days or so Forklift Maintenance work should be carried out as follows. Check the battery level in each cell, the electro-hydraulic plates should be more than 10 ~ 15mm, such as lack of distilled water should be added. With a hydrometer to measure the density of each single cell within the cell electro-hydraulic. Check the degree of discharge, the discharge as more than 25% in winter, summer, and discharge more than 50% should be added to charge the vehicle off. Check the battery housing for cracks and electrical fluid leakage.

charger wall bracket, cleaning station, environmental protection equipment

Electric forklift battery directly affects the efficiency of electric forklifts, electric forklifts and therefore must be time to buy a good selection of batteries, battery electric electric reach stackers factors then what does?
1, Energy
Electricity needed to charge the battery, accounting for 13% of total lifetime costs.
2, the device
Including rack systems, battery charging device, charger wall bracket, cleaning station, environmental protection hydraulic hand truck equipment, accounting for about 1% of the total lifetime cost.
3, the battery
Initial acquisition cost of batteries, accounting for 13% of the total battery life costs.
4, battery management labor
Watch battery is fully charged after fill electrolyte, charge the battery, keep the battery clean and prevent corrosion of the battery needs to labor costs, about 60% of the total life of the station.

Electric forklift has been widely used in various sectors of the national economy

Electric forklift has been widely used in various sectors of the national economy , are ports, terminals , stations, warehouses and industrial and mining enterprises and major basic handling machinery .

In the petroleum, chemical, textile, pharmaceutical, paper , paint and other flammable , explosive and dangerous goods processing , use, handling and storage industry, the most widely used electric forklift same , including the raw materials delivered to the processing sites , will finished transported to storage sites as well as to the electric stacker transport of dangerous goods will be loaded on the vehicle . In these processes, the occasional accident occurred some operations , such as cargo accidentally falling down from the fork or punctured , hit the truck stacked with goods , the piping or other equipment , causing leakage of flammable substances , evaporation and diffusion. In addition , the normal processing of combustible material ( such as filling materials , emissions, crush ) , leakage , evaporation and diffusion are inevitable. These flammable substances emitted Once electric pallet jack mixed with air that can form explosive mixtures explosion when its concentration reaches a limit , and the encounter sufficient ignition energy , that will powered pallet truck cause a fire or explosion.

When electric forklift operations within this environment , because the presence of a hot surface , high temperature exhaust , exhaust sparks, arcs , sparks, static electricity and other sources of ignition , if not its explosion protection , and its potential dangers may occur at any time .

How to improve the efficiency of material handling in places where explosive , while ensuring the security of a job , choose to use explosion-proof electric forklift is the best way to solve this problem .