The Solution of the self propelled pallet jack

self propelled pallet jack is a fully loaded pallet can weigh thousands of pounds. Using a manual pallet jack to move a heavily loaded pallet can take a lot of work. The Rider Pallet Truck is the effort of pumping the handle up and down to raise the load; the initial surge of work required to set the pallet in motion; the extended effort to keep it in motion, pushing and pulling as you move it across the floor; and the final effort to maneuver it into place at its destination.

manual pallet jacks carries a durable and ergonomic design

The manual pallet jacks carries a durable and ergonomic design that’s easy to use. Built for manual use and backed by an experienced dealer network, the hand pallet jacks are designed to keep your operation and warehouse moving. These hand pallet jacks can be purchased through our online pallet jack store.

electric stacker in low shelves warehouse and small supermarket

The electric stacker with initial lifting, the leg can lift up to 120mm to easily negotiate over ramps and bridging plates, with small turning radius and lowest height (1.08-1.38mm) , can carry two pallets at same time, widely used in low shelves warehouse and small supermarket.

a kind of electric pallet jack with unparalleled maneuverability

The electric walkie pallet jack with AC power provides unparalleled maneuverability to navigate in tight spaces – congested store aisles, busy docks and pinwheeling in the back of trailers. Operators will appreciate the smooth, controlled operation and your business will benefit from the increased strength and energy efficiency the self propelled pallet jack delivers without sacrificing durability. 

the series of pallet jacks and trucks.

Pallet jacks are the workhorses of numerous industrial and warehousing applications. Many of the ergonomic innovations we manufacture would not be possible without a dependable pallet truck. It is with this understanding of the essential role the pallet jack plays that we offer the series of economic pallet jacks and Hand Pallet Trucks with scale.

structure of economic pallet jacks

1.Economic Pallet Jacks - Unique design with the electric lifting and the lowering lever, both functions can be controlled easy and safe.

2.The built-in charger makes operations more autonomy and increase the operating range.

3.Additional entry rollers ensure easy pallet entry and preventing possible damages.

4.Sideways casters ensure traveling stability and safety in medium applications.

5.Proofed and ergonomic emergency button and discharge indicator are more robust and reliable than others. The included automatic battery protection ensures high lifetime for the batteries.

6.Suspension casters better with performance in overcoming obstacles, high traveling stability and less wear & noise.

electric stacker into a tight spaces

Liftstar's counter-balanced electric stacker is a thin, highly-versatile lift that compliments nearly any primarily indoor application. Balanced similar to a traditional forklift and without baselegs, the Economic Counter-balance Stacker can fit into tight spaces. Extremely durable and budget friendly, the Toyota Counter-Balanced Stacker can help increase both your uptime and your bottom line.

The most basic form of forklift

A pallet jack, also known as a pallet truck, pallet pump, pump truck, dog, or jigger is a tool used to lift and move pallets. economic pallet jacks are the most basic form of forklift and are intended to move heavy or light pallets within a warehouse.

An exclusive range of hand pallet jacks

With the help of our advancement in technology, we are providing an exclusive range of hand pallet jacks in the market. This range of electric walkie pallet jacks is available in several designs as per the specific demands of our valuable customers. This product requires less maintenance and provides long life to the user. We provide customized packaging to our products at the time of delivery.

electric stacker in a large number of industries

Our offered electric stacker finds application in a large number of industries. Besides being manufactured from the high-grade raw materials, our offered economic electric stacker is examined thoroughly by our adept professionals ensuring its efficient functioning. Clients can avail the offered product from us at market leading prices. 

Pallet jacks for smaller warehouses

Economic pallet jacks are perfect for commercial jobs in smaller warehouses. With proper training, anyone, regardless of physical strength or agility, can operate adjustable pallet jacks. electric walkie pallet jacks are the perfect tool for businesses with physical limitations that would potentially restrict the vehicles ability to move supplies and or equipment.

Pallet jacks are a widely implemented type of materials handling equipment

Pallet jacks are a widely implemented type of materials handling equipment. They are used to haul large loads in and around warehouses, factories, and department stores. They are usually used in combination with loads stored on wooden pallets. The hand pallet jacks features a two pronged fork that can easily slide into place under a pallet. The fork is attached to a mast that operates a hydraulic lifting mechanism. The lifting mechanism allows the fork to be raised so that the pallet clears the fork wheels. Once the pallet is in the raised position, the forklift jack operator can maneuver the pallet and the load around the warehouse, factory, store or other facility to storage or loading dock for transport.

The finest electric stacker

The electric stacker manufactured by trusted vendors and supplied by us, is considered to be amongst the finest that are available in the market. Manufactured in accordance with the set industry norms and guidelines, its quality never deteriorates. Further, the Counter-balance Stacker with its reasonable pricing, performance and service life, makes the product highly asked for in the market.

The using of electric pallet jacks

Electric pallet jacks are powered by a battery pack, designed to allow the truck several hours of operation before recharging is necessary. Recharging a battery is accomplished by attaching cables that connect the battery pack to a power source. An industrial electric plug processes the flow of current necessary to manage recharging the battery safely. Pallet jacks should be charged up and ready to use at all times, just in case the power does go out. It’s also a good idea when the power goes out to unplug all electric jacks because of the surge in power than can occur when the power kicks back on can blow out electric motors and cause batteries to explode. By using electricity, pallet jacks minimize gasoline consumption often necessary with other types of forklifts. Operation of electric economic pallet jacks is much quieter than gasoline-powered alternatives, particularly important in smaller warehouses and spaces. And the lack of fumes associated with fuel use is non-existent, especially important for spaces that have little to no ventilation.

What Types of Jobs Pallet Jacks Are Used for?

Pallet jacks are simply used to transport pallet support structures that often contain the goods dropped off from a truck at a warehouse or retail facility. electric walkie pallet jacks are best for heavy loads and traveling long distances across a warehouse compared to manual pallet jacks.Other types of forklifts are used for heavier lifting and loading jobs, and are always powered electrically with a worker seated inside of a protective cage.

Electric Riding Pallet Jack with a smooth, controlled operation

The Electric Riding Pallet Jack offer smooth, controlled operation and delivers increased strength and efficiency without sacrificing durability. With an intelligent and ergonomic design, the electric walkie pallet jack is ideal for retail store, wholesale delivery and food processing applications as well as for navigating in tight, congested areas.

liftstar electric stacker for a wide array of options

liftstar electric stacker combines productivity, user-friendly controls and safety for the operator.It offers a wide array of options for almost any application.

Ergonomic and engineering advantages make electric platform stacker easy to operate: All control buttons concentrate on the multi-functional tiller head.The central placement of the tiller arm,in accordance with ergonomic engineering,ensuring less steering efforts.

About electric riding pallet jack

These electric riding pallet jack are hard to keep in stock—everyone wants them! With a big load capacity, it serves everywhere from the store aisles to the warehouse dock. Large polyurethane wheels give them long life and improved stability. The pallet support jack rolls quietly and doesn't scratch up floors.

liftstar electric stacker in warehouses

liftstar electric stacker are ideal, simple and effective solutions for stacking and retrieval of pallets at vertical storage spaces in warehouses and are used in the widest range of applications imaginable.Liftstar electric reach stacker are designed for flexible and retrieval handling of specialised loads, increased performance at great heights, comfortable maneuverability in narrow aisles, high residual capacities and long usage times. The versatile liftstar range of stackers are designed to meet needs with precise, reliable and safe operation – walking or riding.

Before the demolition of mobile electric forklift maintenance need to pay attention to the following criteria
1, before the demolition of the mechanical composition of a general understanding, in the absence of understanding before moving Electric and Manual Straddle Stacker internal mechanical structure before the miracle can not blindly disassemble.
2, in the demolition of a better choice of demolition site, to avoid the removal of parts lost.
3, to keep the environment clean, disassemble the mechanical maintenance of the purpose is to carry out maintenance, clean up the oil, rather than causing more oil into the machinery inside.
4, the demolition of parts according to the steps, such as in accordance with the mechanical structure of the demolition is a good choice.
5, the demolition process can not use the wrench at random to hit parts to prevent damage to the parts.

Hydraulic oil is the Rider Pallet Truck hydraulic system to pass the power base of the kinetic energy, together with hydraulic oil can also play a role in mechanical lubrication. Hydraulic oil quality directly affect the efficiency of the hydraulic system, usually for the electric pallet truck hydraulic oil quality of the direct replacement, for the replacement of hydraulic oil needs to be identified in accordance with the following aspects:
1, replace the hydraulic oil before the hydraulic oil to make a quality decision, in the replacement.
2, see the hydraulic system in the proportion of hydraulic oil and water, assuming that the water is too high need to replace the hydraulic oil.
3, to distinguish the proportion of hydraulic oil moisture, the most direct way is a piece of heated iron plate, the hydraulic oil drops on the iron plate, said the obvious sound is to clarify the water, assuming the greater the water, the more the movement miss you.
4, check the electric Rider Pallet truck hydraulic system pollution, electric pallet truck hydraulic oil is not rich in impurities than 7-10mg. Assume that the need to change.

What is the difference between different types of semi-electric stacker? How to choose?

First, the difference between forklift and forklift: some people will be all with a Electric Riding Pallet Jack, forklifts and even trucks are collectively referred to as forklifts, it will be out of tune. But still can simply distinguish them from the appearance: there is no fork in the mast is the van, can only be carried, can not stack the goods; there are fork, there are mast but not support the seat of the stack is high, suitable for Space limited storage in the warehouse, stacking goods; have to support the seat, compared to a large forklift, load up to tens of tons can reach. Of course, there are some stacking cars will be added to drive the seat, here first talk.
According to the power classification, now more common pile of high-speed manual, semi-electric and all-electric three, and forklifts are electric and internal combustion (usually diesel-driven) two. During which the semi-electric stacker generally refers to the electric progress of goods, but by the people to push the stack of high-traffic.
In addition to the classification according to the power, the stacking car will be classified according to the function and characteristics, so they issued a forward, balanced weight, wide leg and other categories, but also for the picking up the stack of cars changed to pick the car situation The They are able to carry the work of the stack of high cars, but the appropriate shelves, trays, goods, etc. will be different, so the demand for warehouses and goods according to the specific situation electric walkie pallet jacks.

forklift jacks with a spring loaded handle provides easy

forklift jacks complete with a heavy duty hydraulic system and powered by an extra large, deep cycle 12 volt battery. reach stackers with dual 8" polyurethane fifth wheel with a spring loaded handle provides easy, pinpoint handling in congested areas. Features 5" dia. phenolic load wheels.

Fixed lift table offer safety screen standard

Fixed lift table ,Remote control floor lock and safety screen standard. semi electric stacker with a minimally charged battery, unit can be used even while recharging. Three light LED charge status indicator included. Easy to read illuminated battery status voltometer.

manual lift stacker with higher lifting capabilities

Same rugged features as the manual lift stacker, but with higher lifting capabilities. Ideal for stacking on high racks or mezzanines. Hand Pallet Trucks with scale ,Travel speed full 2.8 mph - empty 3.5 mph. 64" turning radius for easy handling in congested areas. 24 volt system. External charger plugs into any 110 volt outlet. Straddle legs adjust: 46"-51" I.D. FOB Shipping Point.

Electric stacker has a vital impact on the warehousing industry

Economic pallet jacks is a very common in the warehouse machinery and equipment, because the electric stacker car convenient features, welcomed by the majority of users and love, especially some enterprise warehouses. So what is the impact of the electric stacker on the warehousing industry?
1, in China, most of the industrial enterprises have their own warehouse management system, materials, import and export are based on production demand to purchase, the basic can not wait for the material to run out, which affected the production efficiency, production links are not smooth, so Companies will buy a lot of inventory materials. Electric stackers play a vital role in storing these materials. When the material is more, and the warehouse space is very fixed when the electric stacker will pile up the material higher, saving the workshop space.
2, in general, the warehouse inside the stack of materials are two or three meters high or higher, is the artificial stacking can not be achieved. If it is steel or heavy mechanical parts is very difficult to operate. Only Hydraulic Pallet Trucks at this time can only meet the requirements of storage products.
Warehousing enterprises can achieve the lowest manpower through the electric stacker, increase the degree of enterprise integration, reduce personal injury and cargo damage, improve the efficiency of the target, an electric stacker can reach a few people the workload, For the enterprise to save nearly one hundred thousand yuan of the cost, and handling efficiency, high operational safety, maintenance costs are very low, worry, save money, is the most ideal investment.

How to correctly grasp the stack of high car operation skills

Nowadays, most people think that the stacker is a very good product, it is true, but for such products, or need to understand some of the use of methods, because once the master of these methods, their own is beneficial But the key is to adhere to some of the principles, that is, adhere to some of the rules of operation, mainly in the start to maintain the speed, but not too fast, there is the voltage to observe, join is lower than the limit voltage, then Should not run quickly, need to stop running.
When the electric walkie pallet jacks is running, it is not allowed to switch the switch while pulling it, but it needs to be changed in the direction of travel. This has the effect of preventing the burner from being damaged, and the gear can prevent damage. But also can not be promoted at the same time, can not be carried out at the same time. Of course, there is also the need to pay attention to the drive system, that is to see if it is not a normal sound, and if the sound is not the same, the fault can be excluded, and do not need sick work. And then is to slow down in advance, ahead of the change, and if the road is relatively poor, and then need to reduce the speed of travel.
In fact, master the use of these methods, that is, pay attention to a good security, in fact, once there is no security in this area, people feel no loss, but to bring their own help. Now really need such a product, can bring people a good impact.

How to store anti-rust grease on the way to the customer

Straddle Stackers on the way to the customer often tend to be coated with some rust in the vehicle grease, which is to ensure that the vehicle looks very new. However, the anti-rust grease in the process of sending will inevitably be damaged, then how do we properly store rust-proof grease? Here we understand the next.
The appearance of ultraviolet and high temperature will accelerate the mechanical surface of the anti-rust grease oxidation deterioration phenomenon. Once the rain was soaked, it is prone to these problems, the surface of the phenomenon of corrosion. In order to prevent the production of grease, try to avoid the mechanical surface directly by the sun or ultraviolet radiation and rain water, should be stored in a dark place, avoid water, so that you can extend the use of vehicles, improve anti-rust ability.
Of course, in the storage of rust-proof grease should be the case. In the choice of storage location also has some requirements, not where can store the vehicle and rust-proof grease. Corrosion of metal parts will be a serious threat. To a reasonable layout, and the surrounding volatile volatile places to maintain a certain distance, or even excellent performance of rust-proof grease also failed to achieve these effects.
Metal parts oil seal, after a certain period of time, to regularly sampling rust-proof situation, such as oil film loss, loss, emulsification, discoloration or metal slightly lost light, dark, should be promptly cleaned, replace the performance similar to rust, So as not to affect the rust effect.

Stacked car anti - corrosion method

As a kind of machinery, the use of the process will inevitably occur in the process of corrosion problems, in the face of such problems when we how to solve it?
Stacking cars are usually used in the material is very good, but in the daily if you do not pay attention to electric electric walkie pallet jack car anti-corrosion, then the same will be seriously damaged to the performance of high heap, the following is a brief introduction to the next stacker Anti-corrosion method.
1, appearance: to minimize the electric forklift Jack in the dust and water vapor work, water vapor and dust will be deposited on the surface, prolonged contact will be easy to produce rust.
2, parts clearance: its main consideration is the gap produced by the corrosion, electrochemical corrosion, for the maintenance of mechanical precision parts is the need to pay attention to electrochemical corrosion.
3, parts large: for the general parts are to be anti-corrosion treatment, but the daily need to pay attention to the surface of the oil surface.
The above is in the process of maintenance of the forklift need to pay attention to several aspects, therefore, in the daily use of high heap, we need to understand these basic maintenance knowledge, the only way to make the use of vehicles become more efficient, While the service life will become longer.

Some of the precautions for using the stacker

We use the Electric and Manual Straddle Stacker when the car should pay attention to some of the issues, the following we specifically understand the next.
1, before the operation of high-load operations should be carried out inspection (such as operating checklist), there are any problems or damage should immediately state the competent disposal.
2, the powered pallet truck should be clearly marked load constraints, and provides no transfer or pile of materials beyond its additional load, and shall not add their own weight.
3, the goods should be placed and fixed, bulk goods need to use the appropriate containers, shelves installed, and pallets, pallets can not be damaged.
4, when the slope of the road, should pay special attention to operation, uphill or downhill, the transfer of goods should adhere to the uphill side to prevent the goods fall.
5, from the heap high car operating position, should first put down the fork, closed power and brake.
6, stacking high-speed mobile operation should be forked down to the appropriate height.
In short, some of the use of high heap note is the use of these, and hope to help everyone.

Tell the truth about the quality of the stacker product quality

Automatic stacking machine is mainly used for collecting aluminum foil containers. It is an automatic counter, Hand Pallet Trucks with scale,
We design and develop aluminum foil container production line with a new machine. Very stable, corrosion-resistant, because it uses high-quality aluminum alloy. PCL control panel, size and size can be based on the size of the container. Aluminum foil containers and automatic collection stacking.
You can use the JB-1050S automatic stacker, automatic screen printing machine, UV machine or UV / infrared drying together to collect paper, so that the paper automatically in order to improve production efficiency and product quality.
1. Controlled by the PLC, automatically collect the paper in order to make the paper.
2. Suitable for a variety of paper size, adjust the equipment behind, left and right can be easily and easily operate
3. Optoelectronic equipment inspection and control circuit board, stacking machine pneumatic mechanism in order to make paper.
4. The induction device controls the paper holding board to drop and make sure the receipt is automatically sing.
5. Feeding system control frequency conversion, stepless speed turning.

Where is the stacker porter?

The roadway electric stacker is evolved by forklifts and bridge stackers. Because the bridge is cumbersome and therefore the running speed is greatly limited, it only applies to the storage and storage frequency is not high or the storage of long raw materials and heavy goods warehouse.
Stackers are generally available in large, three-dimensional warehouses, large units, dairy, pharmaceutical, and tobacco warehouses.
The full range of mechanical automatic stacking machines eliminates the need for manual handling of the product, which translates into less material with less markings and better surface quality, which means more available products and less waste.
It also means significant savings in labor and higher throughput. The manual lift stacker is inserted into the system automatically to remove the gasket, and then the heap is transferred to the age rack until the rack is full of contours.

The use of modern stacker awareness

Know the Electric hydraulic stacker, what is the stacking crane stacking crane? I believe that the big business is no stranger, here we come to introduce the stacking machine!
Stacker refers to the use of fork as a take-up device, in the warehouse or workshop stacking items into the crane, often referred to as stacking cranes. The stacking machine is the main lifting and transportation equipment in the three-dimensional warehouse, and it is a special lifting equipment developed with the three-dimensional warehouse. Such equipment for the general warehouse are relatively high, up to 40m or more, mostly in the 10 ~ 25m. The main purpose of the Electric Riding Pallet Jack is in the three-dimensional warehouse between the roadway repeated shuttle operation, will be located in the entrance of the goods into the goods, or the goods in the goods removed to the roadway. But this equipment can only be used in the three-dimensional warehouse, and must be equipped with other equipment to carry goods out of the warehouse.

The face of the hot summer, the Electric and Manual Straddle Stacker how to survive it? In order to ensure the battery life, we charge and use to pay attention to what matters?
1, the charging circuit and the first to be fully out of the loop and chopper, because the chopper and the charger will interact with each other, but also pay special attention to the battery to the electronic control of the alignment to be balanced and as short as possible The
2, charging room and the battery room must be pre-set between the rechargeable cable. At the same time, in order to facilitate maintenance and repair, each charger to have an independent power control switch, charging room but also configure the corresponding power distribution cabinet;
3, if the charging process, the electrolyte temperature exceeds 55 ℃, should immediately try to cool, if the temperature still does not decline, should be suspended charging until the temperature drops and then continue to charge;
4, do not charge when the charger and battery can not be placed together, so the charging room and the battery storage battery room must be separated. Battery room but also row acid fog, ventilation and other equipment;
5, the company should be prepared to put a solution and the new dry batteries and other dangerous goods warehouse, but also a place of tools, connectors, fasteners and other work supplies of the Treasury;
6, if you need to replace or repair the battery, must be specially trained personnel to replace and repair. But also regularly check the wiring is loose or damaged, and timely adjustment or replacement.

High Lifting stacker used ordinary battery should be a monthly water, the other types of batteries to the water consumption, regular to add distilled water. On the temporary use of the battery can be delayed for several months and then pay.
To the battery water, the amount should be added to the electricity. If some of the battery appears to drop the liquid surface faster, frequent water, to check the regulator on the car limit the voltage is too high. Too high will appear overcharge, water consumption, evaporation fast, this situation can be resolved by adjusting the limit voltage. If the individual battery down fast, to check whether the phenomenon of short circuit. In addition, but also depends on the battery slot with or without cracks, electrolyte leakage, according to the truth to judge and then line treatment.
If the Electric counterbalance stacker battery dumps, the electrolyte flows out of the lead, so that the electrolyte can be replenished. The electrolyte can not be added to the battery. Supplementary electric forklift electrolyte to be the original electrolyte density to be added. Sometimes electric handling forklift can not start, many people will think that is due to lack of electricity, often to the battery with electrolyte, the result is counterproductive, greatly shorten the battery life.

Mechanical equipment in the long-term use after the failure is inevitable, for Semi Electric Stackers is no exception, it may also be used when the failure of a certain, what is it? Common power system failure mainly in the absence of Charging, charging voltage is too low and the charging voltage is too high.
1, no charge
Symptom: electric stacker car engine normal work charge indicator light or ammeter indicating negative direction, indicating that the generator does not generate electricity, the battery is not charging.
Failure causes: generator failure, regulator failure or electrical line fault.
2, Electric Straddle Stackers car charging voltage is too low
Symptom: During the operation of the engine, the charging indicator flashes or the ammeter swings around zero. The voltage value at both ends of the battery or generator is measured using the DC voltage of the multimeter. If the voltage is lower than the standard value, the charging voltage is too low.
Failure reasons: regulator operating voltage offset or faulty, transmission belt is too loose, the generator stator, rectifier, rotor and other components are faulty.
3, the charging voltage is too high
Symptom: the stack of high-car engine work process bulb easy to burn, battery electrolyte consumption too fast, the use of multimeter DC voltage file to measure the voltage across the battery or generator, such as higher than the standard value, then the charge voltage is too high.
Failure reason: regulator operating voltage is out of order or faulty.
People in the use of electric forklift may encounter electric forklift such a failure, people in the event of failure can follow the above reasons for timely investigation, if they can not solve the professional maintenance personnel can come to solve.

As we all know, the degree of hydraulic oil cleanliness is the life of the hydraulic system. Hydraulic system has many precision even, and some damping holes or gaps and so on. If the solid impurity invasion will result in precision even pieces of injury, hairpin, oil blockage, etc., endangering the safe operation of the hydraulic system. General solid material invasion path are: hydraulic oil is not clean; refueling tool is dirty; refueling and maintenance, maintenance careless; hydraulic components desquamation and so on.  Electric fork over stacker to remind you forklift driving friends can prevent the following aspects of solid impurities invasion system:
1, when the oil must be filtered oil, refueling tools should be reliable and clean. It is not possible to remove the filter at the filling point of the hydraulic tank in order to increase the fueling speed. Refueling personnel must use clean gloves and work clothes.
2, second-hand forklift maintenance when the removal of hydraulic fuel tank cover, filter cover, detection hole, hydraulic tubing and other parts of the hydraulic system to avoid dust when exposed to the oil, the demolition of the site must be thoroughly cleaned before opening. If you remove the oil tank cover, remove the soil around the fuel tank cover, remove the oil tank cover after the removal of residual parts of the debris (not rinse with water to avoid water into the Hand Pallet Trucks with scale), to confirm the cleaning before opening the fuel tank cover. If you need to use the wipe material and hammer, you should choose not to wear fiber impurities and rubbing the material attached to the rubber hammer. Hydraulic components, hydraulic hose to be carefully cleaned, with high pressure air dry after assembly. Selection of packaging integrity of the genuine filter (if the packaging is damaged, although the filter is intact, it may be unclean). Oil cleaning at the same time to clean the filter, install the filter before the application of scrubbing material carefully remove the filter shell internal dirt.
3, the hydraulic system of cleaning oil must be used with the system with the same hydraulic oil, oil temperature between 45 ~ 80 ℃, with a large flow as much as possible to take away the impurities in the system. Hydraulic system to be cleaned more than three times, after each wash when the oil heat to release all of the system. After cleaning and then clean the filter, replace the new filter and add new oil.

Semi Electric Stackers have auto deceleration function

Semi Electric Stackers have auto deceleration function makes operation more safely. With in handle upright and horizontal position, increasing the safety of the truck. Built-in pressure relief valve protects the trucks from overloads, increases the reliability. Electric hydraulic stacker have fully powered electric stacker transports loads throughout warehouse facilities quickly with less effort. Ergonomic handle feature easy-to-operate throttle with infinite adjustment of forward and reverse speeds. 

Light Duty Semi Electric Stacker have good energy saving effect

Manual Straddle Stacker have stable starting performance,easy to operate.Have outstanding climb performance(easy to climb at 8% slope). free maintenance for the motor and electric controls. Light Duty Semi Electric Stacker have good energy saving effect(the electric pallet truck can recover energy when decelerates,drives on slope or brakes). Vertical drive wheel ensures convenience for maintenance while also ensuring a small turning radius. The structure of motor is water-proof and dust-proof, which makes the braking and motor more durable and reliable.

Economic Manual Stacker provides good stability

Economic Manual Stacker have low gravity centre provides good stability. Advanced electric steering technology is humanized designed, with automatic reset , height display and automatic deceleration at high lifting lever. Economic Light Duty Manual Stacker have simple structure, easy to maintain and repair. Safety features include a horn,an electromagnetic brake and belly reverse button. AC motor eliminates replacement of the carbon brush, provides good ramp starting performance and regenerative breaking functions.

powered stackers have a high storage capacity

powered stackers is highly reliable, and economical. This electric stacker truck  is wherever noise reduction and freedom from exhaust gas pollution are priorities.electric platform stacker equipped with Powerful traction batteries with a high storage capacity and long service life. In addition, the electric pallet stacker offers a high level of working safety, comfort and functionality.

Semi Electric Stackers are versatile machines

Semi Electric Stackers are versatile machines to put a wide range of Battery Operated Stacker used in rack & block stacking,vehicle loading & unloading, order picking & general pallet transports. self propelled stackers provide essential lifting power in warehouse & retail premises where safety and manoeurability are particularly.  it provides a lot more use for its cost, making it a more economical solution to the problem of transporting goods across loading bays.