The face of the hot summer, the Electric and Manual Straddle Stacker how to survive it? In order to ensure the battery life, we charge and use to pay attention to what matters?
1, the charging circuit and the first to be fully out of the loop and chopper, because the chopper and the charger will interact with each other, but also pay special attention to the battery to the electronic control of the alignment to be balanced and as short as possible The
2, charging room and the battery room must be pre-set between the rechargeable cable. At the same time, in order to facilitate maintenance and repair, each charger to have an independent power control switch, charging room but also configure the corresponding power distribution cabinet;
3, if the charging process, the electrolyte temperature exceeds 55 ℃, should immediately try to cool, if the temperature still does not decline, should be suspended charging until the temperature drops and then continue to charge;
4, do not charge when the charger and battery can not be placed together, so the charging room and the battery storage battery room must be separated. Battery room but also row acid fog, ventilation and other equipment;
5, the company should be prepared to put a solution and the new dry batteries and other dangerous goods warehouse, but also a place of tools, connectors, fasteners and other work supplies of the Treasury;
6, if you need to replace or repair the battery, must be specially trained personnel to replace and repair. But also regularly check the wiring is loose or damaged, and timely adjustment or replacement.