Lifting platforms and other engineering machinery parts not working how to solve the causes and on-site

forklift jacksplatforms and other engineering machinery parts not working how to solve the causes and on-site
      1 For example, some parts of the installation mistakes lifting platform, hydraulic lifting platform and single girder cranes and other construction machinery in a class of hydraulic cylinder seals of the support ring (tetrafluoroethylene mainly by filling material) is less flexible, Therefore, it should be preceded by the installation of anti-rust lubricant at 100oC for 10 to 20 minutes to soften, and then by the elasticity larger installation.

2 parts operational problems caused many problems in this regard, especially when running in the engineering vehicle, the new drivers are not familiar with the case of machine performance. For example, there are units of construction vehicle axle splines regular wear and tear, and later discovered that the driver has not disengage the differential lock, leading to increased use of the load transmission parts to wear serious, so to improve operations.

3 Related parts failure caused by damage to parts such as an excavator hydraulic motors on two walks while bad, upon inspection, is a multi-channel rotary joint seal on damage caused by blockage of the loop, so to promptly resolve this question that it would also damage the hydraulic motor.

4 parts quality problems for example excavators, its hydraulic motors, hydraulic pumps, reducer bearings are damaged too, after replacing the original bearing or bad, the final installation of the bearings to solve the problem. Again, this excavator boom cylinder seals are often damaged in the summer, and later found to be the original piston and cylinder of the gap is too big with the rules. After the scene reworked piston, seal no longer bad too.