try to go to the regular professional maintenance repair shop

Electric Stacker, is a specialized in the industry for loading and unloading pallets into pieces, stacking and short-distance transport operations wheeled transport vehicles, widely used in ports, airports, factories workshops and warehouses and other places, with high efficiency low cost, high reliability, and service convenience and many other advantages, the use and maintenance of good good electric stacker can not only prolong its life but also can greatly improve work efficiency.
Electric Stacker during use should pay attention to safety procedures, the general reference to the safe operation of electric stacker Manual, in addition to go through professional training to their posts. As far as possible in the course of slow speed mechanical parts damage.
First, to protect the quality of mechanical parts quality facilities, prevent all kinds of debris into the mechanical operation of the site, in order to protect electric stacker accessory clean. In the event of malfunction, try to go to the regular professional maintenance repair shop.
Besides, now that the summer temperatures rise, high-temperature mechanical operation is electric stacker to bring failure. In the course of construction machinery parts should pay attention to clean and reduce the dust, mechanical ventilation to ensure unobstructed. Found the problem immediately stop using and even troubleshooting, should not lose because of the small and large.
Again, electric stacker in the job reducing the impact of chemical corrosion on the mechanical, the focus is to prevent rain and airborne chemical mechanical intrusion. Staff can take appropriate measures depending on the circumstances.
Electric Stacker again reminded users not to overload operation, wear and tear parts such damage will be slower.
?
Routine maintenance, class work. Accumulated 100 hours of operation, the cumulative work 500 hours.
1, electric stacker car wash dirt, mud and dirt angstroms, key parts are: fork frame and door frame slide, generator and starter, battery electrodes fork column.
2, check all parts of the fastening, focusing on: Fork supporting, lifting chain tensioning screw, wheel bolts, wheel fixed pin, brakes, steering screws.
3, check the foot brake, steering reliability, flexibility.
4, check the leakage, focusing on: all fittings, pump stations, shunt valve.
5, to replace the entire vehicle wear hydraulic rapeseed.
6, check electric stacker battery fluid situation, should be timely enough to add, to ensure the continuation of electricity. And timely attention to charging.
7, check the door frame, fork structure, with or without deformation.
8, check the stacker wheel vehicle wear and tear, with or without good contact with the ground.
Lubricate the whole car new electric stacker or long stops working after electric stacker, at the beginning of two weeks of use, should be lubricated bearings for the lubrication should take advantage of all the new oil will be Chen oil extrusion, and lubricate more than twice, and should pay attention to the following points: 1, lubricating oil cap should be removed before the oil plug and nozzle above the dirt, so dirt falls within the organization. 2, with a grease gun pressure injection of lubricant should pressure injection to combine parts of each component of the extrusion lubricant so far. 3, should be replaced in the summer or winter seasonal lubricant