2013年9月17日星期二

Wheeled crane maintenance



This paper focuses on wheeled crane maintenance, cleaning and lubrication is divided into two parts
 Using clean, wipe each other method to clear up various traces of oil and dirt on the machine, remove the dust on the machine and its components. Cleaning of the hydraulic system is particularly important, foreign matter is the main hydraulic system failure original Gang. Ensure that the gas in the pneumatic system clean and dry to prevent pipe corrosion, improve system reliability.
Wheeled cranes on a variety of cleaning devices, such as air filters, fuel filters, oil filters and hydraulic oil filters should be cleaned and checked regularly, cleaning or replacement. counter balance stackers fuel, lubricating oil, cooling water. Hydraulic system hydraulic oil, torque converter work in oil, compressed air cylinders pneumatic system, the liquid in the battery, etc., in the course of a regular basis, or replenish.
 To improve mechanical efficiency, reduce component wear, friction taken for each lubrication antifriction. For taking forced Hydraulic fixed lift table and splash lubricated parts, lubrication focus of the work that is complementary to clean. Such as gearbox or reducer, engine lubrication, it is necessary to ensure adequate cleaning and lubricating oil; bearing lubrication work is usually caused by lubrication equipment in a timely manner complementary to each lubrication point; For open gear, ring gear, rope, clear round, arm and leg and other friction surface with open sails pieces require direct Xu
Grease lubrication.

没有评论:

发表评论